Firmware changelog of ADM333 tracking device: 0x27 - 23.12.2022 1. Added: operator black list functionality (OPSBLACKLIST0/OPSBLACKLIST1 commands). 2. Added: the number of parameters transmitted via the EGTS protocol has been expanded. 3. Fixed: the problem of inability to connect to the terminal through the remote configurator after changing the password through the server. ! The number of whitelisted operators (OPSWHITELIST0/OPSWHITELIST1 commands) has been reduced from 10 to 7. 0x26 - 24.10.2022 1. Added: WHERE command (in response to it, a link to Yandex.Maps with the current device coordinates is sent). 2. Added: the ability to activate additional confirmation of points sent to the server - the REPLY command. 3. Added: the functionality of the IBUTTON command has been expanded. 4. Fixed: Issues when using the SERIAL 1 setting. 0x08 - 21.05.2020 1. Added: a possibility to work with peripheral devices supporting Modbus RTU protocol. 2. Added: support of CAN-LOG series B controllers. 3. Added: ADM20 RFID reader card mode support. 4. Added: a function to alert the driver about speeding. 0x04 - 23.08.2019 1. Revised: mechanism of recording and storing device configuration is optimized. 2. Revised: expanded options for setting the mechanism of the track detalization. 0x03 - 15.08.2019 1. Revised: the default parameter “time to turn on fixation of coordinates in the absence of vibration” has been changed from 10 to 30 seconds. 0x02 - The first release version.