Firmware changelog of ADM333BLE tracking device: 0x27 - 23.12.2022 1. Added: operator black list functionality (OPSBLACKLIST0/OPSBLACKLIST1 commands). 2. Added: setting an extra point when changing the status of the Smart Fuel Cap BLE sensor. 3. Added: the ability to use the ADM34 tag as a remote control for the discrete output of the tracker. 4. Added: the number of parameters transmitted via the EGTS protocol has been expanded. 5. Fixed: the problem of inability to connect to the terminal through the remote configurator after changing the password through the server. ! The number of whitelisted operators (OPSWHITELIST0/OPSWHITELIST1 commands) has been reduced from 10 to 7. 0x26 - 24.10.2022 1. Added: WHERE command (in response to it, a link to Yandex.Maps with the current device coordinates is sent). 2. Added: the ability to activate additional confirmation of points sent to the server - the REPLY command. 3. Added: support for Smart Fuel Cap BLE sensor. 4. Added: support for BLE tilt sensor ESCORT DU. 5. Added: work with alarm messages from ADM34. 6. Fixed: Issues when using the SERIAL 1 setting. 0x06 - 21.05.2020 1. Added: support of BLE iBeacon and Eddystone-UID beacons. 2. Added: a function of warning the driver about speeding. 3. Revised: an algorithm for working with BLE-peripherals is improved. 4. Revised: functionality for interaction with the BLE-relay ADM33 is expanded. 5. Fixed: adjustments were made to the processing of commands with an empty argument. 0x04 - 23.08.2019 1.Revised: mechanism of recording and storing device configuration is optimized. 2.Revised: ADM33 BLE relay support added. 3.Revised: implemented a mechanism for sending an SMS-alert when the readings of the ADM31 sensors exceed the limits of the established allowable ranges of values. 4.Revised: expanded options for setting the mechanism of the track detalization. 5.Important: starting with this firmware version BLE-DUT Escort with software version lower than 118 is not supported. 0x03 - 15.08.2019 1.Revised: the default parameter “time to turn on fixation of coordinates in the absence of vibration” has been changed from 10 to 30 seconds. 0x02 - The first release version.