During the anodizing process, a very hard protective layer appears on the surface of the aluminum part, resistant to solutions of salts, acids and alkalis. This solution allows you to protect the sensor from the effects of an aggressive environment for many years of operation.
The coating completely eliminates distortion of readings such as swimming, racing, and fuel level emissions.
The measuring part of the fuel level sensor is removable and can be easily replaced with a new one.Given the low cost of the measuring part, this provides a unique opportunity to reinstall the sensor in another tank with minimal effort.
The massive, thick-walled housing with high-quality oil and gasoline seals protects the precision measuring part from the effects of the aggressive environment in which the sensor is operated. Resistance to mechanical vibrations, sudden temperature changes with a multidirectional gradient and the diffusion of hydrocarbons into the measuring part ensures outstanding stability and accuracy.
Before being sent to the customer, all sensors are tested on a stand with a vibration frequency and acceleration that is an order of magnitude higher than vibrations in transport. At the same time, the sensor is constantly interrogated and readings are recorded. If there is at least one measurement error or loss of communication with the sensor in 72 hours, the sensor is rejected!
The highest accuracy and stability of the reading is achieved by checking and calibrating the sensor in the climate chamber. Readings are continuously taken from each sensor for 3 days at constantly changing temperatures. Each sensor is individually calibrated over the entire operating range.
